YouTube video editing5 min read

How to Add B-Roll to YouTube Videos

B-roll is the footage that plays over a talking head or a voiceover. It keeps long videos moving and shows what the words describe. This guide covers how to source b-roll for YouTube videos, where to place it, and how to avoid the common mistakes.

Badar MunirWritten by Badar Munir · FounderReviewed by James · Marketing managerPublished Nov 21, 2026

In shortTo add b-roll to a YouTube video, choose footage that matches a specific line of speech, cut to it for a few seconds at a time, and return to the main shot when the point is made. Source footage you own or have licensed, and place it where it explains something rather than where it fills space.

  • Match each b-roll shot to a specific line, not to the general topic
  • Hold most cutaways for a short time, then return to the main shot
  • Use your own footage first, then licensed footage, and keep records of what you used
  • Vary the framing so the cut feels deliberate, not like a slideshow
  • Check the sound on every cutaway so the speaker's voice stays continuous

How to add b-roll to YouTube videos: the basics

The short answer to how to add b-roll to YouTube videos is this: you cut away from the main shot to footage that shows what is being said, and you cut back when the point is made. B-roll does not replace the speaker. It supports them, and it gives the eye somewhere to go during a long explanation.

Most talking-head videos go flat without b-roll because the same frame runs for minutes. A cutaway resets attention. It also lets you show objects, places, screens or steps that a camera pointed at a person cannot capture. That is why b-roll appears in almost every well-made explainer, interview and tutorial.

If you are still deciding how your long-form video should be structured, read how to edit YouTube videos for retention and YouTube video editing for beginners. This article focuses on the b-roll step.

Where to source b-roll for YouTube videos

Good b-roll comes from three places: your own footage, footage you commission or shoot, and licensed stock. Each has trade-offs in cost, control and originality. Your own footage is the most specific, because it can show your product, your location or your process. Stock footage is useful for general shots such as a city street or a laptop on a desk, but it can look generic if you use the same clips as everyone else.

Check the licence before you publish anything. A stock library's licence states what you can do with a clip, such as whether it can be used in a monetised video and whether you need to credit the source. Keep a record of where each clip came from and what licence applied. A simple spreadsheet with the file name, source and licence is enough.

Do not use footage of people, places or logos in a way that implies endorsement or that breaks a licence. If a shot shows a recognisable person or a brand, make sure you have permission for the way you use it.

  • Your own footage: specific, controllable, and usually the strongest choice
  • Commissioned or shot footage: more cost, but matched to your style
  • Licensed stock: quick and general, check the licence each time
  • Screen recordings and graphics: useful for tutorials and data

Where to place b-roll in a YouTube video

Place b-roll where it explains something. A common rule is to cut to footage when the speaker names an object, a place, a process or an example that the viewer can see. If the speaker talks about a feeling or an opinion, a cutaway often adds nothing, and the main shot should stay on screen.

Avoid placing b-roll at the very start of a sentence or in the middle of a point the speaker is making. Cut when the sentence reaches the noun or the action, and return to the main shot when the sentence ends or when the speaker moves to the next idea. This keeps the cut feeling like a response to the words, not a random interruption.

Use cutaway shots for YouTube videos only where they add information. A cutaway that repeats what the speaker just said is a wasted second. A cutaway that shows the thing being described is usually worth keeping. For an extra layer of structure, many editors add chapter markers at the same points; see YouTube chapters and timestamps.

Test each cutaway by muting the speaker for a moment. If the picture on its own makes sense for the line, keep it. If it only makes sense because of a different line, move it.

How long to hold a cutaway

Hold a cutaway for as long as the line takes to land, and no longer. For most cutaways that means a short time, usually a few seconds, though the exact length depends on the pace of the speech and the complexity of the shot. A wide establishing shot can hold a little longer than a close detail, because the viewer needs time to read the scene.

Keep the cut tied to the speaker's voice. The audio should stay continuous across the cut. If the speaker's voice drops out or jumps, the edit feels broken even when the picture is clean. Use a short audio crossfade, or cut on a breath or a pause, to keep the sound smooth.

Vary the framing. Two cutaways in a row that are both wide shots can look like a slideshow. Mix a wide shot, a medium shot and a close detail to give the sequence rhythm.

Worked example: adding b-roll to a talking-head video

Take a talking-head video where the speaker explains how to plan a weekly content schedule. The speech includes a line about a calendar, a line about filming in batches, and a line about the final review step. The raw edit is one continuous shot of the speaker, which is accurate but flat.

The b-roll pass goes like this. First, list the nouns and actions in the script: calendar, batch filming, review. Second, find or shoot a shot for each one: a close view of a calendar page, a wide shot of the filming setup, and a screen recording of the review checklist. Third, place each cutaway on the line that names it, holding each for a few seconds before returning to the speaker. Fourth, play the edit with the sound on, then with the sound off, and check that the picture supports each line.

The result is the same talk with three cutaways that show what the speaker describes. The viewer gets visual context, the speaker stays the centre of the video, and the pace feels deliberate. You can repeat the same pass for any long video by following the nouns in the script.

Common mistakes in b-roll for YouTube videos

Most weak b-roll comes from a few repeated mistakes. The table below lists them, what they look like and the fix. Fixing the cut usually takes less time than re-recording the speaker.

Remember that b-roll is there for the viewer. If a cutaway does not help them follow the point, remove it, even if the footage looks good on its own.

MistakeWhat the viewer seesFix
Cutaway with no link to the lineFootage that does not match the speechMove the cut to the word it illustrates or remove it
Cut held too longThe speaker disappears and the pace dropsReturn to the speaker once the point lands
Same framing repeatedA slideshow feelVary wide, medium and close shots
Audio jump at the cutThe voice stutters or dropsCut on a pause or add a short crossfade
Unlicensed or unclear footageA risk to the video's monetisationUse owned footage or a clear licence, and keep a record

Tools and workflow for b-roll on YouTube

Any editor that supports multiple video tracks can handle b-roll. Put the speaker on the main track, place each cutaway on a track above it, and keep the audio on the main track so the voice stays continuous. Name each clip with the line it supports, so you can find and change it later.

Pair b-roll with the rest of the edit. Sound design helps a cut feel intentional, and colour matching keeps your footage from different sources looking like one video. For those steps, see sound design for YouTube videos and color correction for YouTube creators.

If you are comparing editing options for long-form work, read Descript alternative for a view of a transcript-led editor, or see CreatorSuite alternatives and comparisons for the wider set of options.

Where CreatorSuite fits in long-form b-roll editing

Adding b-roll to every long video takes time, especially when you have a backlog. CreatorSuite is a done-for-you AI video editing service. You upload your raw footage, pick a style, and CreatorSuite's AI edits it with cuts, b-roll, captions, sound and colour. It then sends back a finished, ready-to-post video.

The service edits the footage you provide. It does not film for you, generate videos from text or make AI avatars. If you want to see how a b-roll pass looks on your own video, the 3-day free trial covers 1 long video up to 10 minutes, and a card is required to start.

For the wider picture on long-form work, read how to repurpose long videos into shorts once the main video is finished, or browse video editing services by format to match the service to the video you make.

How this page was made: written by Badar Munir and the CreatorSuite team with AI assistance, reviewed by James, from facts we checked ourselves. Spotted something out of date? Email us and we’ll fix it.

how to add b-roll to YouTube videos: FAQs

How much b-roll should a YouTube video have?

There is no fixed amount. Add b-roll where it explains a line, and leave the speaker on screen where the point is personal or opinion. If the main shot is on screen for long stretches with nothing changing, add a cutaway at the next concrete noun.

Where can I get b-roll for YouTube videos?

Use your own footage first. Then use commissioned footage or licensed stock. Check the licence for each clip, including whether it allows monetised use and whether you need to credit the source.

Do I need b-roll for an interview or podcast video?

Often yes, but it depends on the format. Interviews usually use cutaways to the place, the object or the work being discussed. Keep the faces on screen for the parts where the emotion or the answer matters.

Can b-roll be a screen recording?

Yes. Screen recordings work well for tutorials, software walkthroughs and data. Keep the text on screen large enough to read, and hold the shot long enough for the viewer to see what is being shown.

How do I keep b-roll from breaking the speaker's flow?

Cut on a pause or a breath, keep the audio continuous, and return to the speaker when the point is made. Watching the edit with the sound on, then with the sound off, shows whether each cutaway supports the line.

Is b-roll the same as cutaway shots for YouTube?

They overlap. Cutaway shots are the cuts away from the main shot. B-roll is the footage those cuts show. Most editors use the two terms for the same job.

Rather not edit it yourself?

Upload raw footage, get a finished edit back. 3-day free trial: 1 short video, 3 clips or 1 long video up to 10 min.

2,700+ creators in the last 7 days

Start 3-day free trial

Get insights from our experts

Practical guides on editing Reels, Shorts, YouTube videos and podcasts, AI editing tools compared, and what editing really costs.

Read more